MONITORING KETIDAKSEIMBANGAN BEBAN TRANSFORMATOR DISTRIBUSI MENGGUNAKAN INTERNET OF THINGS

Authors

  • Osea Zebua Department of Electrical Engineering, University of Lampung
  • Endah Komalasari University of Lampung
  • Syaiful Alam University of Lampung
  • Aldiansyah Aldiansyah University of Lampung

Keywords:

unbalanced load monitoring, distribution transformer, internet of things, monitoring equipment

Abstract

Unbalanced load is one of the causes of unpredictable distribution transformer failure, so it is necessary to monitor the unbalanced load condition of the distribution transformer. Internet of things technology-based equipment supports remote monitoring needs. This paper presents the monitoring of unbalanced load in distribution transformer based on IoT technology. The ZMPT101B voltage sensor and SCT019 current sensor are used to measure the rms voltage and current in each phase, the Arduino microcontroller is used to process the measurement data and send it to the network server via an ethernet shield and a wifi router equipped with an internet modem. The results showed that the monitoring equipment based on IoT technology is able to work to monitor load unbalanced online so that it could be monitored remotely via device connected to the internet network

Author Biographies

Endah Komalasari, University of Lampung

Department of Electrical Engineering, Lecture

Syaiful Alam, University of Lampung

Department of Electrical Engineering

Aldiansyah Aldiansyah, University of Lampung

Department of Electrical Engineering

Downloads

Published

2021-08-20

Issue

Vol. 8 No. 2 (2021): DIELEKTRIKA

Section

Articles